B&G

B&G WTP3

B&G

WTP3 is highest  B&G range  instrument system.

This system provides the levels of accuracy and performance demanded by top racing yachts and sailing superyachts around the world.

The B&G WTP3 brings new architecture with a central CPU linked to distributed data collection networks.  As a result the possibilities for data collection are expanded.

Data is processed in the CPU, which outputs display data, transmits serial and digital data for output via modules, communicates with B&G Deckman via LAN and operates an on-board data logger for post-sail data analysis.

Features:

• Accurate wind information available
• 100Hz sensor sampling, 20Hz calculation
• “Wave Technology” motion correction
• Cubic spline interpolated true wind correction tables
• Fast, stable display update
• Multiple Boat speed inputs
• Switch between GPS inputs
• Magnetic variation input from any GPS
• Polar Tables
• Performance and Start Polar support
• NMEA0183 support
• Selectable output messages

Comparison with WTP2

The B&G WTP3 is a replacement for WTP2.

The main changes are as follows:

The system architecture has changed from a central CPU with multiple sensor inputs to a more compact CPU collecting data via CAN, Fastnet and Ethernet ports from a series of distributed data collection and processing modules. The CPU carries out all calculations
The processor weight  has been reduced through mechanical design and architecture. Final weight will depend on how many modules you will need to add.
Introduces integrated data logging for post-race analysis work. Data logging operates at up to 10Hz
Increased analogue channel sampling rates, now 100Hz
Expansion is via the addition of new data modules, no factory fitted internal cards are required
Mechanical design improvements ensure maximum reliability in harsh environments, including enhanced protection from water, shock and vibration
Fitting of a USB port for data offload and automated software and configuration updates
Introduction of diagnostic logs for system events and user configuration errors
Backup configurations can now be stored on the unit for rollback

Modules available:

-Serial

-Analogue

Send Inquiry